The MAX6375–MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference, comparator, and internally trimmed resistors that set specified trip threshold voltages.
These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from 2.5V to 5V.
These circuits perform a single function: they assert an output signal whenever the VCC supply voltage falls below a preset threshold. The devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6375/MAX6378 (push-pull) and MAX6377/MAX6380 (open-drain) have an active-low output (OUT is logic low when VCC is below VTH). The MAX6376/MAX6379 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6375/MAX6376/ MAX6377 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6378/MAX6379/MAX6380 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.
Ultra-low supply current of 500nA (MAX6375/MAX6376/ MAX6377) makes these parts ideal for use in portable equipment. All six devices are available in space-saving SC70 packages.
|
|
|
·Precision Battery Monitoring·Load Switching/Power Sequencing·Power-Supply Monitoring in Digital/Analog Systems·Portable/Battery-Powered Equipment
|
· Ultra-Low 500nA Supply Current (MAX6375/MAX6376/MAX6377)· Thresholds Available from 2.20V to 4.63V in Approximately 100mV Increments· ±2.5% Threshold Accuracy Over Temperature· Low Cost· Available in Three Versions: Push-Pull OUT, Push-Pull OUT, and Open-Drain OUT· Power-Supply Transient Immunity· No External Components· 3-Pin SC70 Package
|
Terminal Voltage (with respect to GND)
VCC..........................................................................-0.3V to +6V
OUT, OUT (push-pull) ..................................-0.3V to (VCC + 0.3V)
OUT (open-drain) ....................................................-0.3V to +6V
Input Current (VCC) ...........................................................20mA
Output Current (OUT, OUT) ...............................................20mA
Continuous Power Dissipation (TA = +70℃)
3-Pin SC70 (derate 2.17mW/℃ above +70℃).................174mW
Operating Temperature Range ............................-40℃ to +85℃
Storage Temperature Range .............................-65℃ to +150℃
Junction Temperature......................................................+150℃
Lead Temperature (soldering, 10s) ................................+300℃
Post a Buying Lead
Required Field 
